Description
The Yamaha XMV4140 Installation Power Amplifier 4 x 140W combines Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The Series is comprised of 8 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments.
Yamaha XMV4140 Features
Equipped with the newly developed YDIF digital audio format for easy setup.
- 4x 140W at 8Ω/4Ω
- 4x 125W at 100V/70V lines
- 2x 280W at Double Power Mode (8Ω/4Ω)
Yamaha XMV4140 Specifications
General specifications
-
Output power
- 1kHz (THD+N=1%: 4Ω) 140W x 4
- 1kHz (THD+N=1%: 8Ω) 140W x 4
- 1kHz (THD+N=1%: 4Ω / Double Power Mode) 280W x 2
- 1kHz (THD+N=1%: 8Ω / Double Power Mode) 280W x 2
- High impedance: 100V line 125W x 4 / 80 Ω
- High impedance: 70V line 125W x 4 / 40 Ω
-
Voltage Gain
- RL=8Ω 28.7dB
- RL=8Ω / Double Power Mode 31.7dB
- 100V 38.2dB
- 70V 35.2dB
- Power consumption 1/8 power (4 Ω pink noise):150W, Idle (4 Ω):37W, Standby:18.5W
- Total harmonic distortion ≤ 0.2% (1kHz, half power)
- Frequency response 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz)
- S/N ratio ≥ 100dB(A-weighted)
- Crosstalk ≤ -60dB
- Input sensitivity +4dBu
- Input impedance 20kΩ (balanced), 10k Ω (unbalanced)
-
I/O Connectors
- Analog I/O Input: Euroblock x 2 (6P, balanced)
- Digital I/O RJ45 x 2 (YDIF IN / OUT)
- Speaker Output Barrier strip x 4 pairs
- Control ports Remote, Fault Output : Euroblock (3P) x 1
- Network RJ45 x 1
- Others AC Inlet x 1
- Input Level +24dBu (Maximum)
-
Protection circuit
- Load protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
- Amplifier protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)
- Power supply protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
- Cooling 3-Speed fan x 2, front-to-back airflow
- Power requirements 100V, 120V, 230V-240V; 50Hz/60Hz
-
Dimensions
- W 480mm (18.9")
- H 88mm (3.5")
- D 422mm (16.6")
- Net weight 8.1kg (17.9lbs)

