{"product_id":"yamaha-pa2120-power-amplifier-2-x-120w","title":"Yamaha PA2120 Power Amplifier 2 x 120W","description":"\u003cp\u003eThe Yamaha PA2120 Power Amplifier provides 120 watts x 2 channels for standard speakers or a 70-volt system — perfect for a small eatery, conference center, or classroom. The PA Series of commercial amplifiers is a quick and easy solution to providing audio in restaurants, classrooms, retail spaces, and offices. The PA2120 accepts one stereo and two mono\u003cbr\u003eline inputs, allowing you to select from several different sources. \u003cbr\u003eThe PA2120 accepts one stereo and two mono line inputs, allowing you to select from several different sources.\u003c\/p\u003e\n\u003ch2 class=\"s-text-body u-black\"\u003eYamaha PA2120 Features\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eOutput Power: The PA2120 has the following output power:\u003c\/p\u003e\n\u003cp\u003e100 watts per channel x 2 channels at 3O (Lo-Z)\u003cbr\u003e120 watts per channel x 2 channels at 4O (Lo-Z)\u003cbr\u003e100 watts per channel x 2 channels at 8O (Lo-Z)\u003cbr\u003e120 watts per channel x 2 channels at 70V \/ 120W (Hi-Z)\u003cbr\u003e120 watts per channel x 2 channels at 100V \/ 120W (Hi-Z)\u003cbr\u003e200 watts per channel x 1 channel at 70V \/ 200W (Hi-Z)\u003cbr\u003e200 watts per channel x 1 channel at 100V \/ 200W (Hi-Z)\u003cbr\u003eNote: The amplifier has a 4-pin, 7.62mm barrier strip speaker terminal.\u003cbr\u003eConnections and Controls:\u003c\/p\u003e\n\u003cp\u003eFront Panel:\u003cbr\u003eVolume A \/ Volume B: Separate rotary control adjusts the volume output to the speakers. Above the volume knob\u003cbr\u003eare two LEDs: the Volume Signal LED lights when the signal output exceeds a certain level; the Volume Limit \u003cbr\u003eLED lights to indicate the limiter has activated, and the volume needs to be turned down.\u003cbr\u003eBass \/ Treble: Separate bass and treble controls are provided for Channel A and Channel B. A small screwdriver \u003cbr\u003eis needed to make adjustments to the equalizer.\u003cbr\u003ePower Switch: The power button lets you turn the amplifier on and off. The button glows green when the unit \u003cbr\u003eis on, and orange when it's in standby. The device will automatically enter standby mode when no input signal \u003cbr\u003eis detected for 25 minutes. A DIP switch on the rear panel can be set to enable the auto-wake function to turn \u003cbr\u003eon the power when an input signal is detected.\u003c\/p\u003e\n\u003cp\u003eRear Panel:\u003cbr\u003eAC Power Input: An IEC 3-prong input for connecting the supplied power cord, or an optional power cord.\u003cbr\u003eSpeaker Terminals: Barrier strip type speaker outputs. You can make high-impedance connections (100V or 70V) \u003cbr\u003eor low-impedance connections (3O\/4O\/8O). Spade lugs (Â±0.23\" outer width) or bare wire connections work best. \u003cbr\u003e(For Hi-Z 1-channel connections, only terminals A+ and B- are used)\u003c\/p\u003e\n\u003cp\u003eSetup\/Speaker A\/Speaker B DIP Switches: \u003cbr\u003eDCP: An RJ-45 port is provided for connecting a Yamaha Digital Control Panel (DCP), such as the DCP1V4S, DCP4S, \u003cbr\u003eor DCP4V4S. \u003cbr\u003eRemote: A 3-pin Euroblock connector is provided for connecting a remote control for muting\/unmuting all channels \u003cbr\u003eor switching the power from standby to on or from on to standby.\u003cbr\u003eThru Out: An unbalanced stereo RCA output is provided for sending an unaltered signal to an additional amplifier \u003cbr\u003eto drive more speakers.\u003cbr\u003eInput: One stereo RCA line input (unbalanced) and one 6-pin Euroblock connectors (balanced) for connecting \u003cbr\u003eexternal sources.\u003cbr\u003eMode Switch: This 3-way switch lets you set the method by which the input signals from Input A and Input B are \u003cbr\u003esent to the output. You can choose from the following:\u003c\/p\u003e\n\u003cp\u003eStereo: Input A signal sent to Output A, Input B signal sent to Output B\u003cbr\u003eMono: Output to A and B with Input A and Input B signals mixed as mono.\u003cbr\u003eParallel: Input signals from A and B are mixed as mono and sent from Output A. Output B is muted\u003c\/p\u003e\n\u003cp\u003eDIP Switches: The amp features three sets of 8 DIP switches on the rear panel. These DIP switches let you \u003cbr\u003econfigure the amplifier (Setup) and each speaker output (Speaker A, Speaker B) to suit your needs and application.\u003cbr\u003eUsing switches 1, 2, and 3 of the Speaker A and Speaker B DIP switches, you can select the amplifier output power \u003cbr\u003eand impedance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":68003238019317,"sku":"PA2120","price":1645.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/8708\/8373\/files\/45d2f9fff13000fe1fadcf0f2ea39d84.jpg?v=1794273646","url":"https:\/\/www.soundstore.co.nz\/products\/yamaha-pa2120-power-amplifier-2-x-120w","provider":"Soundstore.co.nz","version":"1.0","type":"link"}