Description
The RCF SUB 9004-AS is a single 18” high power active subwoofer. It employs a
state of the art transducer featuring a hypervented high power
neodymium magnetic circuit with 4” voice coil. The extremely high power
amplifier is a new design that delivers extended low frequency
performance. Due to its rugged construction it is perfect for AV rental
inventories.
RCF RDNet - Networked control and much more
RDNet
is a robust management network and control platform for small, medium
and large arena-sized sound systems, as well as complex and extended
installations. Based on a proprietary network protocol, RDNet provides
intuitive control and monitoring of every connected device/object in the
RCF audio system. Each device has DSP to address specific presets or
modifications of parameters to single or groups of objects. A network
user can change level, delay, EQ (linear phase FiR as well) and other
settings, including advanced subwoofer configurations. RDNet is not only
designed for loudspeakers—you can control parameters and routing of
multiple RCF devices, such as digital matrixes or amplifiers.
Top end electronics
The
amplifier integrates a low-noise 32-bit DSP circuit, controlled through
the RCF proprietary RDNet network to easily handle the soft clipping
limiters, RMS limits, polarity, amplitude, timing and equalisation. All
the settings, monitoring and advanced features are available inside the
RDNet Networked Management software. The available control panel on the
back adjusts input sensitivity, Low Cut, Xover, volume, bypass, delay
and presets selection. The regulated power supply guarantees full power
from 100 V to 260 V. The amplifier houses on a unique Vibrostop floating
aluminum panel for extra protection during transportation.
Hyper ventilation system
RCF
manufactures these components to deliver the cleanest, punchiest, and
undistorted low frequencies reproduction. The cone is composed of 30%
carbon fibre, 20% fibreglass and 50% cellulose pulp. This particular
chemical composition has been carefully developed to improve the
robustness and rigidness of the cone avoiding any deformation that would
result in a loss of efficiency. The 4.0" inside/outside voice coil is
wounded on a strong fibreglass former and guarantees a more efficient
cooling. The former is internally and externally reinforced with Nomex
that stiffen the overall structure for a better energy transfer between
the voice coil and the body cone. In order to dissipate the heat
generated by the powerful voice coil, RCF engineers have developed the
unique Hyper Ventilation system with very low power compression. The
cone is water resistant.
Cabinet
The
cabinet is made of high-quality birch plywood with weatherproof
treatment. The subs are stackable and lightweight, for an easy set-up
and tear down. A pole receptacle on the top and side allows the woofer
to be used in various configurations. The heavy-duty coating and the
rugged structure of the cabinet withstand long-term use and
transportation and the separate housing for the amplifier guarantees
component efficiency and reliability. Transportation is fast thanks to
the detachable Kart kit, a dolly caster-board with rugged tour grade
casters and rotating cam mechanism.
SUB9004AS Features:
- 2800 W power rating
- 136 dB SPL Max
- 30 - 400 Hz Frequency Range
- 1 x 18" Hyper Ventilation Neodymium Subwoofer
- DSP Controlled Input Section with selectable presets
- RDNet remote monitoring and control
- Delay Control
- Baltic Birch Cabinet
SUB9004 AS Specs:
Acoustical Specifications:
- Frequency Response: 30 Hz to 400 Hz
- Maximum Sound Pressure Level (SPL) at 1m: 136 dB
Transducers:
- Woofer: 1 x 18'' NEO with a 4.0'' voice coil
Input/Output:
- Input Signal: Balanced/Unbalanced
- Input Connectors: XLR, RDNet Ethercon
- Output Connectors: XLR, RDNet Ethercon
- Input Sensitivity: +4 dBu
Processor Section:
- High-Pass Frequencies: 35 Hz, 50 Hz
- Low-Pass Frequencies: Variable from 50 Hz to 400 Hz
- Protections: Thermal, RMS
- Limiter: Fast Limiter
- Controls: Gain, EQ, Preset Switch, Output Delay
- RDNet: Yes
Power Section:
- Total Power: 2800 W Peak, 1400 W RMS
- Cooling: Forced
- Connections: Powercon In/Out
Standard Compliance:
- Safety Agency: CE Compliant
Physical Specifications:
- Cabinet/Case Material: Baltic Birch Plywood
- Hardware: 2x M20
- Handles: 2 (Side)
- Grille: Steel
- Color: Black
Size:
- Height: 700 mm (27.56 inches)
- Width: 558 mm (21.97 inches)
- Depth: 700 mm (27.56 inches)
- Weight: 57 kg (125.66 lbs)
Shipping Information:
- Package Height: 770 mm (30.31 inches)
- Package Width: 770 mm (30.31 inches)
- Package Depth: 630 mm (24.8 inches)
- Package Weight: 61.8 kg (136.25 lbs)

