dbx 234S 2/3/4 way crossover

dbx 234S 2/3/4 way crossover
Manufacturer: dbxSku: 234S
Price: NZ$438.00
SoundStore Price: NZ$399.00
Inc GST
Delivery: $10 per order
or $15 for Rural Delivery
dbx 234S 2/3/4 way crossover

Lets take a look at the construction features of the dbx 234. At first glance youll notice the units are great looking, and as you turn the controls something else becomes apparent; these units are extremely well built. The controls exude great precision, and the feel is a solid click. Also, when you open the box, you wont find the external power supply that accompanies most processors in this price range. Thats because we know how difficult external powersupplies can be to work with and even though it costs a little more we put the high quality power supply right in the unit. All the inputs and outputs are TRS differentially balanced 1/4 jacks that are bolted down to the chassis. This nutting down of the jacks insures that even if someone steps on a cable plugged into the unit, its not going to tear up the circuit board inside. All dbx crossovers feature Linkwitz-Riley 24 dB per octave filters, the professional standard, but then again, what did you expect?

Via two switches on the back panel you first select whether youre operating your system in stereo 2-way, 3-way or mono 4-way. Another back panel switch also selects whether or not you want to mono sum the LF (subwoofer) out. (Most systems that use a subwoofer are mono subbed to take advantage of amplifier power and because low frequencies are non-directional.) Back panel switches allow you to select the range of the crossover frequencies individually for both channels. The crossover frequency controls have a green LED that indicates the X10 switch on the back panel is activated (we wouldnt make you check the switch position on the back every time you wonder where its set). All these switches are on the back panel because it could be disastrous if you were to change them mid-program. On the front panel youll notice there are LEDs that indicate whether the unit is in mono or stereo mode. Each channel has an input gain control for proper level setting. Theres a recessed 40 Hz low cut (HPF) on each channel to remove unwanted low frequencies. Both the low and high outputs on each channel have a gain control ranging from - to +6 dB, to allow muting of individual outputs and for level matching. Also, these outputs each have phase reverse switches thatll help get you out of a bind without having to reconfigure your system. These phase reverse switches may be internally reconfigured as mute switches.

Youll get great performance, all the features youd expect from a professional product, and the knowledge that youre buying a processor from the people that have been producing the worlds finest processors for over 20 years. The technology that made us famous brings you a dbx crossover which has been tested to the highest professional standards at a price thats just too low to admit.

FEATURES:
- TRS differentially balanced ins and outs
- Mode switches for mono 4-way or stereo 2-way/3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all band outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- dbx 2 year parts and labor as standard
- CSA NRTL/C approved
Customer Reviews
(0.00)
# of Ratings: 0
Loading...