Sennheiser Spectera SEK Wireless Bodypack Transmitter/Receiver

The Sennheiser Spectera SEK Wireless Bodypack Transmitter/Receiver is a dual-function bodypack transceiver that tackles both microphone transmission and in-ear monitor reception with equal assurance. Sennheiser’s revolutionary WMAS technology fuels this bidirectional beltpack unit, allowing you to manage both data and audio control using a single waveband carrier. It also offers straightforward frequency coordination, dropout-free performance, and near-zero latency. The SEK bodypack’s impedance-matching high-power headphone amplifier coaxes crystal-clear sound from any set of in-ears, and it’s a breeze to navigate by virtue of its easy-to-use endless encoder and push button. Moreover, you get full remote control and monitoring of IEM volume, mic/line-level gain, RF health, battery status, and more via LinkDesk software, along with continuous interference management. To top it off, the SEK offers broad compatibility with Sennheiser’s lavalier and headset microphones and in-ear monitors, along with up to seven hours of operating time with a single rechargeable lithium-ion battery. The Sennheiser Spectera SEK bodypack — and the entire Spectera ecosystem — offers an incredibly streamlined wireless solution, consolidating your entire setup into as few components as possible.

Most modern stage setups comprise both microphones and in-ear monitors, requiring you to run two independent wireless systems simultaneously. Boasting bidirectional operation, Sennheiser’s Spectera series provides a more streamlined option, enabling you to deploy mics and IEMs using as few components as possible. The Spectera ecosystem’s core components include the Base Station, SEK bodypack, DAD antenna, and LinkDesk software. The Base Station is a dual-carrier, 32-in/32-out transceiver that acts as the central hub of your setup. SEK bodypacks accommodate both mic/line transmission and in-ear monitor reception simultaneously from the same unit. The DAD is a bidirectional transceiver antenna that sends IEM signals, receives mic/line signals, and manages all bidirectional data concurrently. Finally, Sennheiser’s intuitive LinkDesk software puts comprehensive configuration and monitoring capabilities at your fingertips.

Besides the convenience offered by its streamlined system configuration, the other thing we noted early on while running Spectera through its paces at the Soundstore demo was how stable it is. This rock-solid reliability is a byproduct of Sennheiser’s innovative WMAS wireless multichannel audio technology. By virtue of WMAS’s cutting-edge modulation and multiplexing capabilities, the entire Spectera ecosystem is highly resistant to dropouts and RF fading, especially when compared to typical narrowband systems. Redundant Dante connections and power supplies add to Spectera’s near-bulletproof operation, and thanks to four antenna ports, you’ll benefit from additional zone coverage and spectrum capacity. You can also optionally outfit your Spectera system with redundant MADI audio I/O connections.

• 19’’ 1 RU Base Station with redundant power supplies
• Provides up to 64 channels (32 in / 32 out) and allows for up to two independent wideband RF carriers in UHF or 1G4 (6 or 8 MHz) – country specific per region license
• 4 ethernet antenna ports for redundancy, extended zone coverage, and additional spectrum usage
• Redundant Dante® audio interface
• Two optional slots for redundant MADI (OM or BNC)
• Sample rates of 48 kHz and 96 kHz
• Individual sample rate converters for all audio interfaces
• Wordclock I/O BNC
• Synchronized clock for all audio over RF allows 3D recordings and playback
• Adjustable RF power from 10 – 100 mW (country specific)
• RJ45 network interface for full remote control with secured interface
• 11 Audio Link modes with selectable audio codecs (OPUS, SeDAC) or PCM
• Secure transmission of confidential content using AES 256 encryption
• Future expansion via Cascade port
• Selective headphone output with volume control on front panel
• OLED display, jog wheel navigation, and rugged metal housing
• Base Station activation via LinkDesk: Spectera license defines respective frequency spectrum per region (license sold separately)