The RCF NX932a 12" 2-way Active PA Speaker with 2" Horn is a high powered active speaker
specifically designed to be the everyday tool for rental companies and
professional musicians. It’s one of the most flexible speaker for
deploying high-quality sound as a stand-alone FOH system or as a
satellite (with subwoofer) but either as a stage monitor or a or a
front, down or side fill speaker.
- Up to 132 dB sound pressure level
- 2100W Class-D bi-amplification
- 50 Hz to 20 kHz linear frequency response
- 3" titanium/neodymium compression driver
- 12" woofer
- FiRPHASE 0° phase technology
- Preset Selector: Linear, Boost, and Stage Monitor modes
- Bass Motion Control woofer excursion management
- Six M10 and four Quick Lock rigging points
- The
most powerful amplifier in its class. RCF's improvements in transducer
design make it strong and powerful, so the amplifier follows the
evolution. With 2100W power, the 2-channel NX 932-A Class-D amplifier is
50% more powerful than previous models, and able to manage extreme
sound pressure levels with an ultrafast attack, realistic transient
response, and very low heat loss.
- The NX 932-A is
energy-efficient, so there's no need for a cooling fan—the amplifier is
attached to a solid aluminum heat exchanger in the rear of the
cabinet—with no moving parts. The input circuit features a new
low-distortion design with an advanced safety limiter, maintaining the
true character of the input signal at all levels. All NX 9 Series
amplifiers are designed according to EN62368-1 for maximum safety, and
present a switched-mode power supply section, joining high-efficiency
with minimum weight.
- The
low-frequency transducer is a high-power 12" woofer with a 2.5’’ voice
coil that delivers tight, punchy bass. Reproduction of the mid-bass
frequencies is accurate, transparent, and free from distortion.
Superior compression drivers
- The
ND840 Compression Driver in pure titanium with a 3-inch voice coil
allows a crossover point at only 800 Hz. This allows a better impulse
response, fast decay, and superior efficiency. Lightweight and powerful,
RCF neodymium drivers are a reference in performance and reliability.
Direct Drive Technology
- The
voice coil features a high-temperature Kapton former. The assembly
process takes advantage of the RCF proprietary Direct Drive technology.
The diaphragm’s suspension has been designed following extensive
research and development aimed at minimizing distortion and extending
the low-frequency range.
- When
searching for extended bass with enhanced performance, RCF engineers
found a way to remove the high-pass filter, replacing it with a
forward-thinking approach. Introducing BMC (Bass Motion Control), a
newly advanced woofer excursion management feature.
- NX 9 Series
with BMC can handle the lowest audible frequencies without affecting the
woofer stability, providing extended linearity and better sound
integrity.
- The BMC method works by creating a complete map of
the dynamic behavior of the woofer to generate a custom algorithm that
only limits overexcursions. This gives total freedom of signal
reproduction to the transducer. When high-pass filters normally protect
the woofer motion from becoming destructive but change the phase
behavior, the BMC algorithm breaks this rule.
- In combination with FiRPHASE technology, NX 9 has a new level of audio performance in this series of speakers.
RCF
speakers are designed using a proprietary and advanced digital FiR
technology, conceived to deliver transparent sound, absolute clarity,
and perfect imaging to the listener. The special FiRPHASE filters allow
for coherent distribution of sound for all listeners without phase
distortions, ensuring minimum latencies in the system.
NX
9 can operate as either the main system or as a floor monitor. This
flexibility makes it a smart choice for a wide range of live sound
applications. The rugged all-wood cabinet is easy to carry with handles
on both sides. The lower side includes a steel pole socket for mounting
on a stand or a subwoofer pole. Each model can also be flown, wall- or
truss-mounted using the six included M10 rigging points, Quick Lock
pins, and special accessories. From the wood cabinet to the final
texture and protective grille, the NX 9 Series offers maximum strength
for intensive use on the road or fixed installation.
The
highly innovative entertainment industry is always evolving by
increasing demands on interconnection systems. Particular
environmentally sealed connectors are highly requested for heavy-duty
and harsh environment applications of entertainment equipment. The
speaker features True Outdoor Protection (TOP) PowerCON TRUE1 power
input connectors. These ruggedized sealed connectors feature IP
protection and UV resistance approved according to UL50E.
RCF NX932 a Specifications
| Frequency Response |
45 Hz ÷ 20000 Hz |
| Max SPL @ 1m |
132 dB |
| Horizontal coverage angle |
100° |
| Vertical coverage angle |
70° |
| Compression Driver |
1 x 1.4'' neo, 3.0'' v.c |
| Woofer |
12'', 2.5'' v.c |
| Input signal |
bal/unbal |
| Input connectors |
Combo XLR/Jack |
| Output connectors |
XLR |
| Input sensitivity |
-2 dBu/+4 dBu |
| Crossover Frequencies |
700Hz |
| Protections |
Thermal, RMS |
| Limiter |
Soft Limiter |
| Controls |
Linear, Boost, Stage, Volume |
| Total Power |
2100 W Peak |
| High frequencies |
700 W Peak |
| Low frequencies |
1400 W Peak |
| Cooling |
Convection |
| Connections |
Powercon TRUE1 TOP IN/OUT |
| Cabinet/Case Material |
Plywood |
| Hardware |
2 x M10 Top, 1 x M10 each side, 1 x M10 bottom, 1 x M10 rear
2 each side quick lock pin seat |
| Handles |
1 x Side |
| Pole mount/Cap |
Yes |
| Grille |
Steel |
| Height |
620 mm / 24.41 inches |
| Width |
362 mm / 14.25 inches |
| Depth |
405 mm / 15.94 inches |
| Weight |
22.9 kg / 50.49 lbs |
