Tascam US1x2 USB 2.0 Audio interface

Manufacturer: TASCAMSku: US1x2
Limited Stock
Price: NZ$199.00
SoundStore Price: NZ$185.00
Inc GST
Delivery: $10 per order
or $15 for Rural Delivery

Tascam US1x2 USB 2.0 Audio interface

The US-1x2 is a streamlined product that has been designed to meet requirements for musicians who want to start recording on their computers. This is an audio interface where you can enjoy professional sound quality without specialist knowledge of recording equipment. All in all, The US-1x2 is also the most basic but perfect model designed for users who only requires one mic or uses playback mix like EDM music.

The most important feature is the low noise Ultra-HDDA microphone pre-amplifiers which enhance the microphone signals. Regardless of the condenser or dynamic microphone you are using, you can record with high-quality sound at the correct input level. The addional features are selected by specialists, it allows the simple usability and is dedicated to musicians for their music productions. So even if you are new to an audio interface, you still can start your music production with high sound quality right away.
As well as great input capacity, it has same concept audio circuit as the upper range models which reachs up to 100 dB of S/N ratio. The US-1x2 is more than versatile enough to handle not only for music listening but also music recording, monitoring, and archiving, with cristal-clear sound quality.

If you want to use an audio interface, with a computer connection and optimum settings, you need to update your firmware and driver constantly. The US-1x2 dedicated software has Information Window function/automatic updating that enables you to confirm the latest updates and offers a automatic installation for you. It is no longer necessary to check the latest updates manually.

Other than sound quality, the simplicity of design on the US-1x2 is also relavant for home recording musicians. It is designed by Axel Hartman, an famous synsesizer designer. An design concept that combines functionality and the looks will surely inspires creativity on the desktop.

For any musician who wants to start a recording right away. We have the solution for you. There is DAW software bundled in the product for music production. You can start your music production immediately without paying extras for a DAW to start.

To enjoy your recording in high audio quality with ease, starts from your desktop at home today.

Specifications
General
Sampling frequencies   44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz 
Quantization bit depth   16/24 bits 

Analogue audio inputs
Mic input (balanced, IN1)   XLR-3-31 (1: GND, 2: HOT, 3: COLD) 
  Input impedance   2.4 kΩ 
  Nominal input level (gain knob at max.)   −65 dBu (0.0004 Vrms) 
  Nominal input level (gain knob at min.)   −8 dBu (0.0775 Vrms) 
  Maximum input level   +8 dBu (1.9467 Vrms) 
  Maximum gain   57 dB 
Line/instrument input (balanced/unbalanced, IN2)   6.3-mm standard TRS stereo jack
(Tip: HOT, Ring: COLD, Sleeve: GND) 
  When set to LINE (balanced)     
  Input impedance   10 kΩ 
  Nominal input level (gain knob at max.)   −41 dBu (0.0069 Vrms) 
  Nominal input level (gain knob at max.)   +4 dBu (1.228 Vrms) 
  Maximum input level   +20 dBu (7.75 Vrms) 
  Maximum gain   45 dB 
  When set to INST (unbalanced)     
  Input impedance   ≥1 MΩ 
  Nominal input level (gain knob at max.)   −51 dBV (0.0028 Vrms) 
  Nominal input level (gain knob at max.)   –6 dBV (0.5015 Vrms) 
  Maximum input level   +4 dBV (1.584 Vrms) 
  Maximum gain   45 dB 
Line input L/R (unbalanced)   RCA 
  Input impedance   10 kΩ 
  Maximum input level   +10 dBV (3.162 Vrms) 

Analogue audio outputs
Line output L/R (unbalanced)   RCA 
  Output impedance   100 Ω 
  Maximum output level   +6 dBV (1.995 Vrms) 
Headphones output   6.3-mm standard stereo jack 
  Maximum output power   18 mW + 18 mW or higher
(THD+N 0.1% or less, 32 Ω) 

Other inputs and outputs
USB   4-pin USB B-type 
  Transfer rate   USB 2.0 Hi-speed (480 Mbits/s) 
Power supply (DC IN 5V)   USB Micro B type 

Audio performance
Mic preamp EIN (equivalent input noise)   −127 dBu or less
(150 Ω termination, gain knob at max.) 
Frequency response (input to line or headphones* output) 
  44.1/48 kHz   20 Hz: +0/−0.5 dB (JEITA)
20 kHz: +0/–0.5 dB (JEITA)
20 kHz: +0/–1 dB* (JEITA) 
  88.2/96 kHz   20 Hz: +0/−0.5 dB (JEITA)
40 kHz: +0/−1.0 dB (JEITA)
40 kHz: +0/–3.0 dB* (JEITA) 
S/N ratio   100 dB or higher
(22-kHz LPF, A-weighted, line input to line output, gain knob at min., standalone mode, JEITA) 
Distortion   0.006 % or less
(1-kHz sine wave, line input to line output, rated input level, max. output level, standalone mode, JEITA) 
Crosstalk   95 dB or more
(1-kHz sine wave, line input to line output, standalone mode, JEITA) 

Host computer requirements
Windows 
  Supported operating systems   Windows 10, 32 bits or 64 bits
Windows 8.1, 32 bits or 64 bits
Windows 7, 32 bits or 64 bits, SP1 or later 
  Computer hardware requirements   Windows-compatible computer with a USB 2.0 port 
  CPU/processor speed   2 GHz or faster dual core processor (x86) 
  Memory   2 GB or more 
  Supported audio drivers   ASIO 2.0, WDM 
Mac 
  Supported operating systems   macOS Sierra (10.12 or later)
OS X El Capitan (10.11 or later)
OS X Yosemite (10.10 or later) 
  Computer hardware requirements   Mac with a USB 2.0 port 
  CPU/processor speed   2 GHz or faster dual core processor 
  Memory   2 GB or more 
  Supported audio driver   Core Audio 
iOS device   iOS device running iOS 7 or later 
  Supported audio driver   Core Audio for iPhone 

Power supply and other specifications

Power supply 
  Used with a computer   USB bus power 
  Used with an iOS device   USB power adapter (that can supply 5 V and a current of at least 700 mA)1
External battery pack (that can supply 5 V and a current of at least 700 mA)2 
Power consumption   2.5 W 
Dimensions (H × W × D, without protrusions)   146 mm × 55 mm × 120 mm 
Weight   623 g 
Operating temperature range   5–35 °C 
1 We strongly recommend using a Tascam PS-P520E or the USB power adapter included with the iPad/iPhone. No USB power adapter is included with an iPod Touch. To use it with an iPod Touch, purchase a genuine Apple USB power adapter (that can supply 5 V and a current of at least 700 mA) separately. 
2 We strongly recommend using a Tascam BP-6AA external battery pack. If using another external battery pack or mobile battery, purchase one that can supply 5 V and a current of at least 700 mA.

Customer Reviews

(0.00)stars out of 5
# of Ratings: 0
Loading...