Your shopping cart is currently empty.
Crown XLi3500 PA Power Amplifier, 2x1350w
Manufacturer: CrownSku: XLi3500
In stock but low levels. Please email us to check before ordering
Price:
NZ$3,635.00
SoundStore Price:
NZ$3,295.00
Inc GST
Freight $15 per order to main city.
+ extra $5 if small town/rural.
Crown XLi3500 PA Power Amplifier, 2x1350w
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
- Efficient forced-air cooling prevents excessive thermal buildup
- Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio-frequency interference
Specs:
- 1350W Per Channel at 4 Ohms
- 1000W Per Channel at 8 Ohms
- 2700W at 8 Ohms Bridged Mono
- Stereo/Parallel/Bridge-mono Mode
The flagship Crown Xli3500 power amplifier offers a huge amount of power
in an affordable, rugged and reliable live sound amplifier. Built for
musicians, DJs, and entertainers as well as houses of worship, discos,
and pubs; the Xli3500 features 1350-watts of power, RCA and XLR inputs,
selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post
outputs, stereo/parallel/bridge-mono mode, power/fault/signal
presence/clip indicators, forced-air cooling; and protection against
shorts, no-load, on/off thumps and radio-frequency interference.
Drawing from over six decades of experience
in building amplifiers, the unit is capable of delivering 1350W per
channel at 4 ohms, 1000W per channel at 8 ohms, and 2700W at 8 ohms in
bridged-mono mode..
Features:
- 1350 Watts per channel at 4 Ohms- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
- Efficient forced-air cooling prevents excessive thermal buildup
- Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio-frequency interference
Specs:
- Channels: 2
- Guaranteed Minimum Power:
- 4 ohm stereo (per channel): 1350 watts
- 8 ohm stereo (per channel): 1000 watts
- 8 ohm bridge mono: 2700 watts
- Sensitivity (full rated power at 8 ohms): 0.775V or 1.4V
- Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted): > 100 dB
- Total Harmonic Distortion (THD) (20Hz - 20kHz): < 0.5%
- Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB): = / < 0.35%
- Frequency Response (at 1W, 20Hz - 20kHz): 0 dB, -1 dB
- Crosstalk (below rated power):
- at 1kHz: -75 dB
- at 20kHz: - 59 dB
- Damping Factor (from 10Hz to 400Hz, 8 ohms): > 200
- AC Line Voltage and Frequency Configurations (± 10%):
- 120VAC 60Hz
- 220VAC 50/60Hz
- 230-240VAC 50/60Hz
- Dimensions (H x W x D): 3.5 x 19 x 14.4 inches (89 x 482 x 366mm)
- Weight: 43.0 lb (19.5 kg)
Customer Reviews
