Wharfedale EZGO 140w battery powered PA system

Wharfedale EZGO 140w battery powered PA system
Manufacturer: Wharfedale ProSku: WHA EZGO
Price: NZ$799.00
SoundStore Price: NZ$749.00
Delivery: $10 per order
or $15 for Rural Delivery
Wharfedale EZGO 140w battery powered PA system (pictures show optional extras)

The new EZGO portable amplifier system from Wharfedale Pro is ideally suited to cover large areas such as classrooms, conference rooms. This system has the optional extra of a USB input module and 2ch wireless microphone receiver/transmitter module with up to 2 handheld radio mics, plus a weatherproof cover. See bottom of the page for optional extra's.

The optional EZ-USB expansion module for EZGO adds comprehensive USB connectivity to the EZGO system. It is excellent for adding background music or recordings to your presentations or performance.

The USB connector can be used for computer connectivity or playback from a USB storage device. Front panel transport controls and an IR remote control put you in charge of the performance regardless of your physical position.

EZGO is fully class compliant and requires no drivers when used with modern operating systems, such as MacOSX, Windows XP, Vista and Windows 7 requiring no additional driver software to function.

With its mains power supply (AC 90-240V) and 8 hours battery use time if fully charged, EZGO is the ideal portable amplifier system for the today’s mobile sound performance.

  • Two 5” full range drivers with 1” voice coils
  • Formed aluminum cone diaphragm provides outstanding heat transmission
  • of driver
  • 15 oz ferrite magnet for high sound performance
  • Tuned port tube design for increased bass performance Portable case with extendable handle
  • Optional Wireless Microphone Transmitter/Receiver, Weather Proof Bag and
  • Optional USB module
  • XLR mic input with gain control
  • RCA unbalanced line level input with gain control
  • 2 red peak LEDs for XLR mic and RCA line input
  • 3 LEDs (Green, Orange & Red) to indicate the battery level, 1 red LED to
  • indicate the connection status of battery
  • 1 green LED to indicate the existence of external power
  • 3 band EQ control
  • Master volume control with power on/off switch
  • 70W RMS power output, 140W peak power
  • Power supply from DC jack or IEC AC receptacle
Continuous 70W
Peak 140W
AC Power Supply AC100~240V 50/60Hz
Signal to Noise Ratio >80dB
T.H.D. <0.1%
Frequency Response 50Hz~18KHz±3dB
PROTECTION Short circuit, Thermal protect
System Specification
System Type Full range
Frequency Response @ +/- 3dB 60-18kHz
Sensitivity 1w@1m 98 dB
Peak SPL 122 dB
System impedance 4 ohm
Power Supply DC Jack, 12V/6A IEC Jack, AC100~240V 50/60Hz
Driver Size 5/125
Frame Material Steel
Dimensions (H x W x D) 360 x 468 x 247 mm
Net Weight 12.2kg
Gross Weight 14.0kg
Customer Reviews
# of Ratings: 0