EWI DBRC-2A 2-CH PASSIVE DI Box RCA connectors
This DI is a great item for a DJ with an RCA output sub mixer or anyone that wants to hook a laptop output to the main mix board. It is equipped with two RCA jacks and a parallel 1/8" stereo jack for inputs. The 1/8" jack is wired with the ring to channel 1 and the tip to channel 2 with sleeve to ground. On the output side, there is one XLR jack for each channel to send to the board. Also there is a separate ground lift switch and a –0dB, -20dB, -40dB attenuator switch on each input channel.
The internal splitting transformer used in the DBRC-2A is good quality and is a key feature. The quality of the internal splitting transformer is the key to a good performing D.I. Box. The transformers used in the EWI DBRC-2A are manufactured to strict EWI tolerances designed specifically for this application.
The box is extruded aluminum. The box has a nice feature in that it is built so multiple boxes can be hooked together physically either side-by-side or one on top the other. There are 4 nice little rubber feet on the bottom to help keep it from sliding around on a slick surface or damage a nice surface. The box is extremely tough.
Specifications:
Model:
DBRC-2A
Channels:
Two
Inputs:
RCA and 1/8" Stereo jacks, 50k ohm
Max input voltage:
32v
Outputs:
Balanced XLR (M) 600 ohm to mix console
Attenuator:
-0, -20, and -40 dB
Freq. Response:
15Hz to 30KHz
Dimensions:
5.118” w x 1.742”h x 3.200”d