TASCAM UH7000 pro-level microphone preamp and audio interface

TASCAM UH7000 pro-level microphone preamp and audio interface
Manufacturer: TASCAMSku: TASCAMUH7000
Price: NZ$899.00
SoundStore Price: NZ$825.00
Inc GST
Delivery: $10 per order
or $15 for Rural Delivery
TASCAM UH7000 pro-level microphone preamp and audio interface

The UH-7000 is a pro-level microphone preamp and audio interface, designed with a strong focus on low noise and high audio quality. Not only can this unit be used as a 4-in/4-out audio interface in a DAW production environment, but as a standalone microphone preamp and AD/DA converter. The built-in HDIA (High Definition Instrumentation Architecture) microphone preamps are newly designed with low noise and high audio quality. These impressive mic pres perform at −128dBu EIN, a 117dB signal-to-noise ratio and distortion ratio of 0.0009% or less.

The grand nature of the UH-7000's sound is partially due to the careful attention spent on selecting parts. In addition to the Burr-Brown PCM4220 ADC, PCM1795 DAC converters and thin film metal resistors, installed is a powerful TCXO clock generator with +/−1ppm precision.

The units half-rack size makes it easy to install at a studio console or work desk. The thick aluminum panels on the front and sides of the full-metal body increase stability. Highly important but easily forgotten are the smooth-tension aluminum input level knobs for precise level adjustments.

The UH-7000 microphone preamp and audio interface enables composers, musicians and recording engineers to produce music in their private quarters at a level only reached in professional studios.

eatures:
  • Two 20-segment LED level meters
  • Standard TRS headphones output jack - 45mW/channel output
  • +48 Phantom power supply
  • Two pairs of balanced analog XLR jacks for both input and output
  • Professional output specifications (maximum output level: +24 dBu)
  • Two balanced analog TRS input jacks
  • XLR digital input and output jacks support AES3-2003/IEC60958-4 (AES/EBU) and IEC60958-3 (S/PDIF) formats
  • Three-pronged inlet power cable
  • Half-rack size
  • Confirmed operation with major DAW software, including Sonar X3, ProTools, Cubase and Live
  • RoHS CompliantThin film metal resistors with outstanding noise performance
  • Thin film metal resistors with outstanding noise performance
  • High audio quality film capacitors with low distortion
  • Low latency monitoring through the DSP mixer
  • DSP mixer can be switched between multitrack and stereo mix modes
  • DSP mixer enables independent adjustment of recording and monitoring levels
  • Line or digital outputs can be selected using the DSP mixer
  • DSP dynamics effect can be applied to inputs, outputs or the master (compressor, noise suppressor, de-esser, exciter, EQ, limiter/low cut)
  • DSP REVERB (hall, room, live, studio, plate) send effect is perfect for monitoring when recording
  • Link line function enables volume control of powered monitors
  • Single punch MIXER PANEL button
  • Strong, durable aluminum body
  • Large INPUT level knobs enable precise adjustment of input levels
Specs:
Sampling Frequencies 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Depth 24-bit
Line Input Connector: 1/4" (6.3 mm) TRS jack, (T:hot, R:cold, S:ground), balanced
Input Impedance: 15 kohms
Maximum Input Level: +26.5dBu
Minimum Input Level: -38dBu
Mic Input Connector: XLR-3-31, (1:ground, 2:hot, 3:cold), balanced
Input Impedance: 2.2 kohms
Maximum Input Level: +2 dBu
Minimum Input Level: -60 dBu
Line Output Connector: XLR-3-32, (1:ground, 2:hot, 3:cold), balanced
Output Impedance: 100 ohms
Maximum Output Level: +24 dBu
AES/EBU Audio Input Connector: XLR-3-31, (1:ground, 2:hot, 3:cold)
Formats: IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU)
Sampling Frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
AES/EBU Audio Output Connector: XLR-3-32, (1:ground, 2:hot, 3:cold)
Formats: IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU)
Sampling Frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Phones Connector: 1/4" (6.3 mm) stereo phone jack
Maximum Output: 45 mW + 45 mW or more (THD+N 1% or less, 32 ohms loaded)
USB Connector: USB B type 4-pin
Format: USB 2.0 high speed (480 Mbps), full speed (12 Mbps)
Power AC 100 - 240 V, 50 / 60 Hz
Power Consumption 15 W
Audio Performance ADC Chipset Dynamic Range: 123dB (A-weighted)
DAC Chipset Dynamic Range: 123dB (A-weighted)
Frequency Response: 20Hz to 80kHz +0.005dB/-0.16dB (mic preamp for all sampling frequencies)
THD: 0.0009% or less(MIC to AD)
S/N Ratio: 117dB (MIC to AD)
EIN: -128dBu
Windows Requirements Compatible OS: 

Windows XP: 32-bit SP3 or later

Windows 7: 32/64-bit SP1 or more

Windows 8: 32/64-bit

Windows 8.1: 32/6-4bit

*Windows Vista and Windows XP 64-bit are not supported.

 

Compatible Computers: 

Windows-compatible computer with a USB 2.0 port

 

CPU Type/Speed:

Dual core/2 GHz or faster (x86)

 

Memory:

2 GB or more

 

Supported Audio Drivers:

ASIO2.0, WDM (MME)

 

Mac Requirements Compatible OS:

Mac OS X Snow Leopard (10.6)

OS X Lion (10.7)

OS X Mountain Lion (10.8)

OS X Mavericks (10.9)

 

Compatible Computers:

Apple Macintosh computer with a USB 2.0 port

 

CPU Type/Speed:

Dual core/2 GHz or faster

 

Memory:

2 GB or more

 

Supported Audio Drivers :

Core Audio

 

Dimensions 8.4 ×3.2 ×9.2" (214.0 × 81.2 × 233.0 mm)
Weight 4.85 lb (2.20 kg)

Customer Reviews
(0.00)
# of Ratings: 0
Loading...