JBL CONTROL29AV 8" Install Speaker w/bracket

JBL CONTROL29AV 8" Install Speaker w/bracket CONTROL29AV-WH
Manufacturer: JBL ProSku: CONTROL29AV
Options:
Price: NZ$1,230.00
SoundStore Price: NZ$1,099.00
Inc GST
Delivery: $10 per order
or $15 for Rural Delivery
JBL CONTROL29AV 8" Install Speaker w/bracket.
 
Available in black or white (-WH). The cabinet will accept a variety of paints to match any décor.
 
The Control® 29AV-1 provides improved voicing for extremely fl at, high fi delity performance, extended bandwidth and well-controlled defined coverage from a compact loudspeaker.

The rotatable high-frequency horn allows use of the speaker in either vertical or horizontal orientation. Consistent coverage ensures excellent sound character throughout the listening area. Moderate magnetic shielding allows use of the speaker as close as 230 mm (9 ) to video monitors.

The top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows use of either 70V or 100V distributed speaker lines. In bypass position, the 8? impedance allows use of multiple speakers on a loudspeaker line.

The included InvisiBall mounting method is simple to install, aims easily and provides a high degree of theft deterrence. InvisiBall allows horizontal rotation of up to 41° off-axis and vertical rotation of up to 36° (horn end inward) or 23° (woofer end inward).
Weather resistance has been maximized. The woofer’s cone is made of kevlar, surround is pure butyl rubber, and the driver basket is rear loaded to minimize direct exposure. The compression driver’s diaphragm is pure titanium. The grille is thermoset composite coated and comes with foam to minimize incursion of water. Nickel/zinc rust-resistant terminals ensure a secure input connection. An MTC-PC2 sealed-entrance cover is included to further protect the speaker’s terminals.

JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full hi fidelity sound.

Features:

  • Extremely smooth, fl at frequency response with extended bandwidth.
  • 110° x 85° HF coverage, rotatable horn.
  • 110 Watt transformer for 70V or 100V lines, with 8? thru.
  • SonicGuard™ overload protection.
  • 200 mm (8 ) Kevlar cone woofer, 25 mm (1 ) titanium diaphragm compression driver.
  • Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket.
  • Sealed input panel cover and screwdown input terminals.
Specifications:
  • Frequency Range (-10 dB)1: 37 Hz –18 kHz
  • Frequency Response (± 3 dB)1: 43 Hz – 15 kHz
  • 100 Hr Power Capacity 2:
    300 Watts Continuous Program Power
    150 Watts Continuous Pink Noise
  • Maximum SPL @ 1m3: Short-Term: 118 dB; Long-Term: 112 dB
  • Nominal Sensitivity4: 90 dB, 1W @ 1 m (3.3 ft)
  • Nominal Coverage Angle5: 110° H x 85° V, rotatable
  • Directivity Factor (Q): 6.7, averaged 500 Hz to 16 kHz
  • Directivity Index (DI): 8.3 dB, averaged 500 Hz to 16 kHz
  • Nominal Impedance: 8 ohms
  • Minimum Impedance: 6.3 ohms @ 230 Hz 3.3 ohms @ 4.1 kHz
  • Crossover Type: 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
  • Transformer Taps:
    70V: 110W, 55W, 28W & 14W
    100V: 110W, 55W, & 28W
  • Thru Position: 8ohm nominal
  • Recommended High-Pass: See chart
  • Transducers:
  • Low Frequency: 200 mm (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fi berglass former
  • High Frequency: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
  • Physical:
  • Enclosure Material: High impact polystyrene
  • Grille: Thermoset composite coated steel
  • Overload Protection: Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during extreme overload conditions.
  • Environmental: IEC 529 IP-X4 splashproof rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
  • Termination: Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
  • Safety Agency Rating: Transformer is listed per UL1876.
  • Colors: Black or white (-WH)
  • Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in)
  • Net Weight (ea): 12.2 kg (26.8 lbs)
  • Shipping Weight (ea): 14.0 kg (30.8 lbs)
  • Included Accessories: 1 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench
Customer Reviews
(0.00)
# of Ratings: 0
Loading...