Description
The RCF NX932a 12" 2-way Active PA Speaker with 2" Horn is a high powered active speaker specifically designed to be the everyday tool for rental companies and professional musicians. It’s one of the most flexible speaker for deploying high-quality sound as a stand-alone FOH system or as a satellite (with subwoofer) but either as a stage monitor or a or a front, down or side fill speaker.
- Up to 132 dB sound pressure level
- 2100W Class-D bi-amplification
- 50 Hz to 20 kHz linear frequency response
- 3" titanium/neodymium compression driver
- 12" woofer
- FiRPHASE 0° phase technology
- Preset Selector: Linear, Boost, and Stage Monitor modes
- Bass Motion Control woofer excursion management
- Six M10 and four Quick Lock rigging points
- The most powerful amplifier in its class. RCF's improvements in transducer design make it strong and powerful, so the amplifier follows the evolution. With 2100W power, the 2-channel NX 932-A Class-D amplifier is 50% more powerful than previous models, and able to manage extreme sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss.
- The NX 932-A is energy-efficient, so there's no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet—with no moving parts. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NX 9 Series amplifiers are designed according to EN62368-1 for maximum safety, and present a switched-mode power supply section, joining high-efficiency with minimum weight.
- The low-frequency transducer is a high-power 12" woofer with a 2.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.
Superior compression drivers
- The ND840 Compression Driver in pure titanium with a 3-inch voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.
Direct Drive Technology
- The voice coil features a high-temperature Kapton former. The assembly process takes advantage of the RCF proprietary Direct Drive technology. The diaphragm’s suspension has been designed following extensive research and development aimed at minimizing distortion and extending the low-frequency range.
- When searching for extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), a newly advanced woofer excursion management feature.
- NX 9 Series with BMC can handle the lowest audible frequencies without affecting the woofer stability, providing extended linearity and better sound integrity.
- The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits overexcursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the BMC algorithm breaks this rule.
- In combination with FiRPHASE technology, NX 9 has a new level of audio performance in this series of speakers.
RCF NX932 a Specifications
Frequency Response
45 Hz ÷ 20000 Hz
Max SPL @ 1m
132 dB
Horizontal coverage angle
100°
Vertical coverage angle
70°
Compression Driver
1 x 1.4'' neo, 3.0'' v.c
Woofer
12'', 2.5'' v.c
Input signal
bal/unbal
Input connectors
Combo XLR/Jack
Output connectors
XLR
Input sensitivity
-2 dBu/+4 dBu
Crossover Frequencies
700Hz
Protections
Thermal, RMS
Limiter
Soft Limiter
Controls
Linear, Boost, Stage, Volume
Total Power
2100 W Peak
High frequencies
700 W Peak
Low frequencies
1400 W Peak
Cooling
Convection
Connections
Powercon TRUE1 TOP IN/OUT
Cabinet/Case Material
Plywood
Hardware
2 x M10 Top, 1 x M10 each side, 1 x M10 bottom, 1 x M10 rear
2 each side quick lock pin seat
Handles
1 x Side
Pole mount/Cap
Yes
Grille
Steel
Height
620 mm / 24.41 inches
Width
362 mm / 14.25 inches
Depth
405 mm / 15.94 inches
Weight
22.9 kg / 50.49 lbs

