      |
MICROTECH MT600 325W/CH @4 OHMS
Crown's first touring workhorse, the Micro-Tech Series, delivers industry standard performance and reliability. Able to drive low-impedance loads with ease, Micro-Tech amplifiers feature three separate power supplies for exceptional reliability and impressive power ratings. Our patented ODEP circuitry keeps the amplifier working long after others would quit. Grounded bridge circuitry doubles the available voltage without placing output transistors in stressful configurations like other more conventional amplifiers. The unique forced-air cooling system makes certain heat is dissipated quickly and evenly. As a result, you get maximum performance without the threat of damage to the amplifier or other system components. SPECIFICATIONS Amplifier Accessories: Accepts MT-XLR and MT-BB input modules. Signal-to-Noise:(A-weighted) Better than 105 dB below full rated power into 8 ohms with 26 dB gain. (Unweighted) Better than 100 dB below full rated power. Input Impedance: Nominally 20 K ohms balanced and 10 K ohms unbalanced. Controls: Enable, channel 1 and 2 level controls, stereo/mono switch (Stereo, Bridge-Mono, Parallel-Mono), ground lift switch, three-position input sensitivity switch (0.775 V or 1.4 V for full output or a 26 dB voltage gain). Connectors: Inputs: Balanced 1/4-in. phone jack for each channel. Output: A pair of color-coded binding posts for each channel. Dimensions: 19 in. (48.3 cm) standard rack mount width, 3.5 in. (8.9 cm) height, 16 in. (40.6 cm) depth behind mounting surface. Approximate Weight: Micro-Tech 600: 36 lbs., 4 oz. (16.5 kg). Micro-Tech 1200: 41 lbs., 1 oz. (18.7 kg). Micro-Tech 2400: 46 lbs., 14 oz. (21.3 kg). Total Harmonic Distortion (THD): Less than 0.05% at full rated power from 20 Hz to 1 kHz increasing linearly to 0.1% at 20 kHz. Intermodulation Distortion (IMD): (60 Hz and 7 kHz 4:1) Less than 0.05% from less than 164 milliwatts to full rated power. Load Impedance: Rated for 2 to 8 ohms in Stereo, 4 to 16 ohms in Bridge-Mono, 1 to 4 ohms in Parallel-Mono. Safe with all types of loads |
