Dynaudio BM6AMkII 6.7" Powered Studio Monitor (Pr) BM6a

Dynaudio BM6AMkII 6.7" Powered Studio Monitor (Pr)

Price: $4,242.01 inc GST

Delivery: $9 + GST per order or $13+gst for Rural Delivery

E-mail this product to a friend

Dynaudio BM6AMkII 6.7" Powered Studio Monitor (Pr)

This two-way active analog nearfield monitor with a 6.9” woofer and a 1.1” soft dome tweeter delivers distinctive Dynaudio clarity and accuracy, exposing every audible detail for the critical and demanding engineer. Onboard LF/MF/HF placement filters, as well as subwoofer high-pass filters allow the monitor to easily adapt to any environment.

Features:

Integrated positioning filters (LF/MF/HF shelving/notch)
60/80Hz high-pass filter for subwoofer adaptation
Balanced analog XLR input
50W/100W tweeter/woofer amplifier
Input sensitivity switch (-10/+4dB range)
Clip indicator LED
Slow attack optical HF protection
Thermal amplifier protection

Specifications:

Model: BM 6A Mk II
System: Two-way Active Nearfield Monitor
Frequency Response (+/- 3 dB): 40 Hz - 21 kHz
Max SPL 1m, pair (IEC Long Term): 115 dB peak
Max SPL 2m, 5.1 (IEC Long Term): 115 dB peak
Input level for 85 dB, SPL @ 1m (+4/-10): -14dBu RMS @ 0dB setting
Input level for max peak SPL (+4/-10): +9dBu Peak @ 0dB setting
Power consumption: Idle: 15 W / Max: 130 W
Amplifier power: Tweeter: 50 W / Woofer: 100 W
Resonance Frequency: 37 Hz
Internal Cabinet Volume: 11.7 liters
Bass Principle: Bass reflex
Crossover Frequencies: 1500 Hz
Crossover Slope: 6 dB/oct
Tweeter: Esotec 28 mm/1.1” soft dome, rear chamber, Magnetic fluid. 4 mm die-cast alu front, Pure alu wire voice coil
Woofer: 175 mm/6.9”, One-piece molded poly-prop cone, 75 mm/3” pure alu voice coil
Weight: 10.5 kg / 23.12 lbs
Dimensions (WxHxL): 203 x 335 x 327 mm / 8” x 13.2” x 12.9”

Product Rating:

(5.00) # of Ratings: 1 (Only registered customers can rate)

(Only registered customers can rate)

1 - Terrible

2 - Bad

3 - OK

4 - Good

5 - Great

50%

100%

Sort: New to Old RE-SORT COMMENTS:

Showing comments 1-1 of 1

1. Roy on 14/07/2008, said:

These monitors are great, imaging is accurate, sound quality is excellent nice bass response without being coloured (unlike others I have listened to). Mixes appear to translate very well when listening on monitoring headphones, ipod, home stereo or in the car etc, which was one of the main reasons I purchased these speakers so I guess they are delivering. warning don't listen to mixes you previously produced or you will want to re mix them again.
Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

Showing comments 1-1 of 1